Early access

3D SCAN GARAGE

How to get a 3D scan of a car for designing aftermarket parts

If you design parts that have to fit a real vehicle, you need measured geometry of the surface, not a styled 3D model. There are three practical ways to get it: buy an existing scan, request a scan nobody has captured yet, or scan the vehicle yourself.

Option 1: buy an existing scan

This is the fastest route when your vehicle and zone are already scanned. Browse by make, model and year and compare what each listing declares: accuracy in millimetres, capture method, datum, coordinate system and file formats. You get a license to the file and a download link right after payment.

Option 2: request a scan that does not exist yet

If nobody has scanned your vehicle, post a bounty describing the make, model, year, zone and precision you need, and the reward you will pay. Scanner owners can see what is in demand and fulfil it, and other buyers who need the same data can back the same request.

Option 3: scan it yourself or hire a scanning service

Scanning it yourself makes sense if you have access to the vehicle and the equipment, or need unusual coverage. Hiring a scanning service works for one-off projects, but you pay for the capture again for every vehicle.

What to check before you rely on a scan

  • Declared accuracy in millimetres, and how it was measured or verified.
  • Capture method (LiDAR, structured light or photogrammetry), which affects surface detail.
  • The datum and coordinate system, so you can align your CAD to the scan.
  • Coverage: exactly which zone is included and which is not.
  • File formats (STL mesh or STEP/STP) and whether they suit your CAD workflow.
  • The license tier: single-project, commercial or exclusive buyout.

A note on use

Scans are licensed as reference geometry for engineering and for aftermarket or compatible-parts development. They are not a source for OEM replicas or counterfeit parts.

Updated 2026-11-16

More guides